Ch ang ing the
LLCI T Pap er Size
5-18
Advanced Printer Use
2 Replace the indicator area cover by aligning it in front of the
body and sliding it straight back, being careful that the mag-
netic door catch is accessible and that the tongues at the
back of the cover are inside the housing.
3 Reinsert the three silver screws you removed when access-
ing the DIP switches.
4 Close the lid and the door, making sure the door snaps shut.
5 Insert the LLCIT as you would any paper cassette, lining up
the guides with the support tails and sliding the LLCIT until it
snaps into place.
WA RNING!
It tak es two p eople to life the LLC IT back in to plac e. Do
no t lift the LLCIT with pa per loaded in it.
ACHTU NG!
Man benö tigt 2 Per sonen u m den LLCIT z u tragen.
Tragen SIe de n LLCIT nie m it eingeleg tem Pap ier.
To Next Page
Loading...
Need help?
General