To Next Page

To Previous Page

OFF-LINE SETUP MENU

XES SYNERGIX 8850 PRINTER OPERATOR MANUAL 25

Viewing the recent fault log

To view the recent fault:

1. Access the PRINTER MENU. See "Accessing the Printer

Menu" in this chapter.

2. Press the Previous or Next key until DIAGNOSTICS is

displayed.

3. Press the Enter key to select DIAGNOSTICS.

4. Press the Previous or Next key until RECENT FAULT LOG is

displayed.

5. Press the Enter key to select RECENT FAULT LOG.

6. Press the Next key to display the two most recent faults.

7. Press the Previous or Next key to scroll through the fault

listing.

8. When you are finished viewing the fault listing, press the On-

line/Off-line key to return to on-line mode.

• The on-line/off-line indicator will light.

• The display will indicate "XES SYNERGIX 8850 IDLE."

Displaying the billing meter counts

To display the billing meter counts:

1. Access the PRINTER MENU. See "Accessing the Printer

Menu" in this chapter.

2. Press the Previous or Next key until BILLING METERS is

displayed.

3. Press the Enter key to select BILLING METERS. The value

for METER A is displayed. METER A provides the square

footage of prints produced.

4. To view the value for METER B, press the Previous or Next

key. METER B provides the linear feet of media produced.

5. When you are finished viewing the meter counts, press the

On-line/Off-line key to return to on-line mode.

• The on-line/off-line indicator will light.

• The display will indicate "XES SYNERGIX 8850 IDLE."

Xerox 8850 User Manual

Other manuals for Xerox 8850