CARE
28 XES SYNERGIX 8850 PRINTER OPERATOR MANUAL
Replacing the toner cartridge
To replace the toner cartridge:
CAUTION: Toner identified for use in the XES Synergix 8850
Printer is a two-component material made specifically for this
printer. Use of toner not identified for the XES Synergix 8850
Printer will damage the printer.
1. Open the replacement toner carton.
• Remove the replacement toner cartridge.
• Remove the replacement toner waste bottle.
• Save all the replacement toner packaging for recycling the
used toner cartridge and toner waste bottle.
2. Open the toner supply access cover.
3. Slide the gold cartridge dispenser patch cover to the left to
expose the dispenser patch.
4. Pull the plunger to the right and lift the front end of the toner
cartridge.
5. Release the plunger and rest the cartridge on the plunger
mechanism.
To Next Page
Loading...
Need help?
General