WWaassttee CCoonnttaaiinneerr
RReeppllaacciinngg tthhee WWaassttee CCoonnttaaiinneerr
When it is time to replace the waste container, a message appears on the control panel.
When you replace the waste container, clean the printhead lenses. For details, refer to Cleaning the
Printhead Lenses.
Caution: Spread paper on the floor to catch possible toner spills.
WARNING: If you spill any toner in the printer, wipe it up using a moist cloth. Never use a
vacuum cleaner to remove spilled toner. Sparks inside the vacuum cleaner can cause a fire or
explosion.
WARNING: If you accidentally get toner on your clothes, lightly dust them off as best as you
can. If some toner remains on your clothes, use cool water, not hot, to rinse off the toner. If
toner gets on your skin, wash it off with cool water and a mild soap. If you get toner in your
eyes, wash it out immediately with cool water and consult a doctor.
Note: Each waste container includes installation instructions.
To replace the waste container:
Caution: Do not perform this procedure when the printer is copying or printing.
1. Open the front cover of the printer.
2. Remove the new waste container from the packaging. Retain the packaging.
238
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
Maintenance
To Next Page
Loading...
Need help?
General
