Network Installation Features
ColorQube 8570/8870 Color Printer
System Administrator Guide
23
Discovery Protocols
This section includes:
• DNS/WINS on page 23
• Service Location Protocol on page 23
• UPnP on page 24
• WSD (Web Services for Devices) on page 25
DNS/WINS
DNS/WINS settings can be obtained from the BOOTP or DHCP server, if enabled. These settings enable
the printer to register its IP name and address so other devices on the network can refer to it by name.
Note: Enabling Dynamic DNS allows the printer to update the DNS server. Only enable Dynamic
DNS if your DNS server supports dynamic address updates.
To change the DNS/WINS settings:
1. Launch a Web browser from your computer.
2. Type your printer IP address in the browser Address field. For details, see Finding the Printer IP
Address on page 17.
3. Click the Properties tab.
4. On the left navigation pane, expand the Protocols folder.
5. Select TCP/IP.
6. If prompted, type your Admin or Key User name and password.
7. At the top of the Properties tab, click DNS/WINS.
8. Modify DNS/WINS settings on the DNS/WINS Settings page. Follow the instructions on the page.
Note: If you are unsure what DNS/WINS addresses are used on your network, see your DNS/WINS
server administrator.
9. Click the Save Changes button.
For more information, click the Help button in
CentreWare IS to see the CentreWare IS Online Help.
Service Location Protocol
To change the configuration of the Service Location Protocol (SLP) Service Agent in the printer:
1. Launch a Web browser from your computer.
2. Type your printer IP address in the browser Address field. For details, see Finding the Printer IP
Address on page 17.
3. Click Properties.
4. On the left navigation pane, select the Protocols folder.
5. On the left navigation pane, select SLP.
6. If prompted, type your Admin or Key User name and password.
7. Under Service Location Protocol (SLP) Settings, in the SLP Enable field, select On or Off.
To Next Page
Loading...
Need help?
General