Network Administration Features
ColorQube 8570/8870 Color Printer
System Administrator Guide
47
Cloning
Cloning enables you to configure one printer and then copy that configuration to another printer on
the same network. Use CentreWare IS to select the settings you want to clone from one printer to
another.
Note: To use the clone feature, both the Source Printer and Destination Printer must have an IP
address, endmost, and default gateway. Both printers must be the same model, and HTTP must
be enabled on the Destination Printer.
To clone settings from one printer to another printer using CentreWare IS:
1. Launch a Web browser from your computer.
2. Type your printer IP address in the browser Address field. For details, see Finding the Printer IP
Address on page 17.
3. Click Properties.
4. On the left navigation pane, select Clone Printer.
5. If prompted, type your Admin or Key User name and password.
6. On the Clone Printer page, select the settings you want to clone from the source printer or click
Check All to select all the settings. The settings are:
802.1X Access Control
Control Panel Lockout Custom Paper Types
Date and Time DNS/WINS
Email Server E-Supplies
EtherTalk FTP
HTTPS Information Forwarding
Input Trays Interfaces
IPP IPsec
LPR Mail Alerts
PCL Port 9100
PostScript Printer Defaults
Printing Security Settings Remote Printing
Security SLP
SNMP TCP/IP Settings
TCP/IP (v6) Settings TFTP
UPnP Usage Profile Properties
Warmup Web Links
To Next Page
Loading...
Need help?
General