Security Features
ColorQube 8570/8870 Color Printer
System Administrator Guide
78
5. Restrict access to the CentreWare IS SNMP and SSL pages:
a. On the Properties tab, select Security.
b. On the left navigation pane, select Administrative Security Settings.
c. If prompted, enter your Admin or Key User name and password.
d. On the Administrative Security Settings page under Feature Authorization, clear the View
Configuration Web Pages check box for users as necessary. Clear the Modify Configuration
Web Pages check box for users as necessary.
6. Configure SNMP v3 by setting up the SNMP Administrative and Key User accounts:
a. Select the Protocols folder on the left navigation pane and then select SNMP.
b. If prompted, enter your Admin or Key User name and password.
c. On the SNMP Configuration page, click the Configure SNMP v3 button and set up the
SNMP Administrative account. For more information, see Configuring SNMP v3 on page 79,
or click the Help button in the CentreWare IS Online Help.
Configuring SNMP v1/v2c
Configuring SNMP v1/v2c Community Names
To configure SNMP v1v2c community names:
1. Launch a Web browser from your computer.
2. Enter the printer IP address in the browser Address field. For details, see Finding the Printer IP
Address on page 17.
3. Click Properties.
4. On the left navigation pane, select the Protocols folder.
5. Select SNMP.
6. If prompted, enter your Admin or Key User name and password.
7. On the SNMP Configuration page, click the Configure SNMP v1/v2c button.
Note: If you are not sure what SNMP settings are used on your network, see your System
Administrator.
8. To set community names for GET/SET SNMP queries and traps, enter information (up to 32
alphanumeric characters) in one or more of the following fields:
• GET Community Name: Allows a host to perform SNMP GETS on the printer using this
community name.
• SET Community Name: Allows a host to perform SNMP SETS on the printer using this
community name.
• Trap Community Name: Allows a host to receive traps from the printer using this community
name.
Note: Hosts must have these community names configured in their applications to access the
printer using SNMP v1/v2c.
9. Click the Apply button to save the changes.
To Next Page
Loading...
Need help?
General