To Next Page

To Previous Page

1–94

SER

UIDE

OPIER

)

Outputting Sample Prints

This section describes how to output and delete documents stored

by the sample print feature. You can instruct the machine to output

sample prints when you are printing multiple copies of a job from a

client. Selecting this feature will instruct the machine to print only

one copy of the job. To print the remaining copies after confirming

the print result, instruct the machine to output the sample print.

Select the Job Status button on the Control Panel. The Job

Status screen is displayed.

Select Stored Documents. The Stored Documents screen is

displayed.

Select Sample Print. The Sample Print screen is displayed.

Select the ID number of the user you want to verify.

• Enter a 3-digit number for the user ID using the Numeric

Keypad on the control panel. When you have finished entering

the number, the screen showing the desired items is

automatically displayed. You can select items using the up and

down arrow buttons.

NOTE:Information can be updated by selecting Refresh.

Select Document List. The sample print documents for the

selected user can be confirmed.

Xerox DocuColor 1632 User Guide

Other manuals for Xerox DocuColor 1632