Safety Notes 7
IE
IE
the wall and 100 mm from the left and right
vents to the wall. A poorly ventilated
machine can cause excessive internal heat
and fire.
The accompanying diagram shows the
minimum clearances required for normal
operation, consumables replacement, and
maintenance to ensure your machine
operates at peak performance.
When moving the machine, be sure to
unplug the power cord from the outlet. If the
machine is moved with the power cord
connected, it can cause damage to the
cord which could result in fire or electric
shock.
When moving the machine, do not tilt it
more than 10 degrees. If tilted excessively,
the machine may fall over and cause
injuries.
For Power & Earth Connection
Use only the power cord specified for this
printer. Using a different cord may cause
fire or electric shock. Also, do not use this
machine’s power cord with other
equipment.
The power specifications are listed below.
The specifications that apply to your
machine depend on your machine
configuration. Connect the power plug only
to a properly rated power outlet. Otherwise,
it can cause fire or electric shock. If in
doubt, contact our Customer Support
Center or your dealers.
• Rated voltage 110-127Vac +/-10%
Rated Frequency 50/60 Hz
• Rated voltage 220 - 240 V
Rated frequency 50/60 Hz
Ensure that the plug connection is free of
dust. In a damp environment, a
contaminated connector can draw a non-
negligible amount of current that can
generate heat and eventually cause fire
over an extended period of time.
Always use the power cord provided with
your machine. When an extension power
cord is required, always use a properly
rated cord. If in doubt, contact our
Customer Support Center or your dealers.
If you use a cord with an unspecified
current rating, the machine or plug may
emit smoke or become hot to the touch
externally.
Do not attempt to rework, pull, bend, chafe,
or otherwise damage the power cord. Do
not place a heavy object on the cord. A
damaged cord can cause fire or electric
shock.
Never touch a power cord with wet hands.
Danger of electric shock exists.
600mm
100mm
100mm
150mm
To Next Page
Loading...
Need help?
General