General Procedures and Information
Phaser 3100 MFP 04/08 6-29
GP 11 Connecting the Power and Switching on the Machine
1. Make sure the machines On/Off switch (H) is positioned to Off (position 0).
2. Plug one end of the power cord (B) into the machines power socket (I), refer to GP 10.
3. Plug the other end of the power cord (B) into the power supply wall socket.
4. Set the On/Off switch (H) to On (position I).
The machine powers on. After a few seconds, when the machine has warmed up, the Easy Install
function is launched and the LCD screen displays the following message:
LANGUAGE
YES=OK - NO=C
Refer to the User Guide booklet for more information on carrying out the Easy Install initial setup.
To Next Page
Loading...
Need help?
General
