What to do if my Xerox PHASER 3635 says Toner Low?
If your Xerox All in One Printer displays a 'Toner Low' message, it means the print cartridge is almost empty. You can temporarily resume printing by opening the front cover, removing the print cartridge, gently shaking it, reinstalling it, and then closing the front cover. Remember to reorder a new print cartridge.
What to do if my Xerox PHASER 3635 All in One Printer says Paper Empty at Tray?
If your Xerox All in One Printer displays a message indicating 'Paper Empty at Tray', it means the copy paper in the paper tray has run out. To resolve this, load paper in the tray indicated by the warning message.
What to do if my Xerox PHASER 3635 says Toner Empty?
If your Xerox All in One Printer indicates 'Toner Empty', it means the print cartridge is empty and needs replacing. Open the front cover and replace it with a new print cartridge.
How to fix Jam from Tray on Xerox PHASER 3635?
If your Xerox All in One Printer is showing 'Jam from Tray', it means copy paper has jammed in the paper tray. Open the indicated tray and remove the jammed paper. Also, open the back and front covers to remove any additional jammed paper.
What to do if my Xerox PHASER 3635 All in One Printer says Paper Empty at Bypass Tray?
If your Xerox All in One Printer indicates 'Paper Empty at Bypass Tray', it means the copy paper in the bypass tray has run out. Load paper in the bypass tray to continue.
How to clear Duplex Jam on Xerox PHASER 3635 All in One Printer?
If your Xerox All in One Printer displays 'Duplex Jam', it means copy paper has jammed in the side cover. Open the back covers and remove the jammed paper to resolve the issue.
What to do if my Xerox PHASER 3635 All in One Printer says Tray Paper Low?
If your Xerox All in One Printer warns 'Tray Paper Low', it means the paper supply in the tray has run low (fewer than 50 sheets). Load paper in the tray indicated by the warning message.
How to fix DADF Jam on Xerox PHASER 3635?
If your Xerox All in One Printer displays 'DADF Jam', it means the loaded document has jammed in the DADF. Open the DADF cover and remove the jammed media to resolve the issue.
What to do if Xerox PHASER 3635 All in One Printer says Print Cartridge Not Installed?
If your Xerox All in One Printer shows 'Print Cartridge Not Installed', the print cartridge is either not installed or not installed correctly. Install the print cartridge, or if it's already installed, check that it has been installed correctly. If the problem persists, call for service.
What to do if my Xerox All in One Printer says Invalid Print Cartridge?
If your Xerox All in One Printer displays 'Invalid Print Cartridge', the installed print cartridge is not a valid Xerox cartridge. Check the print cartridge and install a valid Xerox cartridge if necessary. If the problem persists, call for service.
General| Print Technology | Laser |
|---|---|
| Print Speed | 35 ppm |
| Print Resolution | Up to 1200 x 1200 dpi |
| Standard Paper Capacity | 550 sheets |
| ADF Capacity | 50 sheets |
| Duplex Printing | Yes |
| Scanner Type | Flatbed with ADF |
| Functions | Print, Copy, Scan, Fax |
| Processor | 360 MHz |
| Connectivity | Ethernet |
| Maximum Paper Size | 8.5 x 14 inches |
| Scanner Resolution | Up to 600 x 600 dpi |
| Network Connectivity | Ethernet |
| Display | 7-inch color touchscreen |
| Weight | 49 lbs |
Describes Xerox Phaser 3635MFP models & capabilities.
Provides contact info & tips for seeking assistance.
Details safety precautions & warnings for equipment use.
Discusses compliance with environmental standards.
Guidelines for disposing of old equipment & batteries.
Details component locations & model differences.
Explains control panel buttons & screen functions.
Instructions for loading paper into the trays.
How to view machine info, faults, & service status.
Explains how to view & understand machine errors.
Outlines the basic steps for making copies.
How to adjust appearance settings like lighten/darken.
Adjusting original size & scan areas.
Options for finished output like booklet creation.
Copying both sides of an ID document onto one side.
Basic steps for sending faxes.
Methods for entering fax numbers.
Advanced fax features like polling & delay send.
Automatically forwarding incoming/outgoing faxes.
Outlines the basic steps for scanning.
Choosing pre-configured scan templates.
Adjusting scan appearance & style.
Managing file destinations, formats, & metadata.
Basic steps for sending emails from the machine.
Standard email job options like recipient, subject, & message body.
Adjusting scan appearance for email.
Steps to scan & store documents to a USB drive.
Managing files & folders on a USB drive.
Selecting & outputting pre-stored jobs for printing.
How to print files directly from a USB drive.
Basic steps for printing documents.
Procedure for printing on custom size media.
Selecting job type & media requirements.
Modifying appearance of print jobs.
Instructions for preparing & loading paper into trays.
Guidelines for selecting & loading paper & envelopes.
How to access the machine's setup menus.
Customizing various fax settings.
Information on configuring paper trays.
Tracking machine usage & controlling access.
Settings for job operation rights & image overwrite.
Verifying machine & UI performance.
Information on items needing replenishment or replacement.
Procedure for replacing a used print cartridge.
Instructions for cleaning various parts of the machine.
Details on machine configurations, size, weight, & speed.
Frequency, voltage, & power consumption details.
Details on Fax & Print features.
Instructions for clearing machine faults.
Identifying & clearing paper jams.
Table of errors, faults, descriptions, & solutions.
To Next Page
