Xerox PHASER 7500 User Manual

Troubleshooting
Phaser 7500 Color Printer
User Guide
130
Media Misfeeds
Probable Causes Solutions
The media is not correctly positioned in the tray. Remove the misfed media and reposition the media
properly in the tray. Ensure that the media guides in
the tray are set correctly.
The number of sheets in the tray exceeds the
maximum sheets allowed.
Remove the excess media and load media below the
fill line.
The media guides are not correctly adjusted to the
media size.
Adjust the media guides in the tray to match the size
of the media.
Warped or wrinkled media is loaded in the tray. Remove the media, smooth it out, and reload it. If it
still misfeeds, do not use that media.
The media is moist from humidity. Remove the moist media and replace it with new, dry
media.
Unsupported media (wrong size, thickness, type, etc.)
is being used.
Special media must be loaded in Tray 1 (MPT) only.
Use Xerox-approved media. See Supported Media on
page 55.
The recommended transparency or label sheet is
facing the wrong way in Tray 1 (MPT).
Load the transparencies or label sheets according to
the manufacturer’s instructions.
Envelopes are loaded incorrectly in the tray.. Envelopes must be loaded LEF. To use SEF, you must
define a SEF custom size.
The media feed roller is dirty. Clean the media feed roller. For more details, see
Maintenance and Cleaning on page 98.

Xerox PHASER 7500 Specifications

General

Brand	Xerox
Model	PHASER 7500
Category	Printer
Language	English