Printing
Phaser 7500 Color Printer
User Guide
83
Printing Booklets
With 2-sided printing, you can print a document in the form of a small book. Create booklets for any
paper size that is supported for 2-sided (duplex) printing. The driver automatically reduces each page
image and prints four pages per sheet of paper (two on each side). The pages are printed in the correct
order so that you can fold and staple the pages to create a booklet.
When you print booklets, you can also specify the creep and gutter in supported drivers.
• Creep: Specifies how much the page images are shifted inward (in 10ths of a point). This
compensates for the thickness of the folded paper, which otherwise would cause the page images
to shift slightly outward when folded. You can select a value from zero to 1.0 points.
• Gutter: Specifies the horizontal distance (in points) between the page images. A point is .35 mm
(1/72 in.).
The following additional booklet printing options are available in some drivers:
• Draw Page Borders: Prints a border around each page.
• Target Paper Size: Specifies the size of the paper for the booklet.
• Right to Left: Reverses the order of the pages in the booklet.
Selecting Booklet Printing in a Supported Driver
Windows 2000 or newer and PostScript driver
1. Select the Layout/Watermark tab.
2. Select the Booklet Layout option.
If you are using the PostScript driver, click the Booklet Options button to specify the creep and
gutter.
3. If desired, select Draw Page Borders from the drop-down list.
Creep Gutter
To Next Page
Loading...
Need help?
General