Printing
Phaser 7500 Color Printer
User Guide
71
Printing on Glossy Paper
Glossy paper can be printed from any tray within the following weight range:
• Thin Glossy Paper: 106–169 g/m
2
• Glossy Paper: 170–220 g/m
2
• Thick Glossy Paper: 221–256 g/m
2
Note: Glossy paper should be printed on one side only.
To order paper, transparencies, or other specialty media, contact your local reseller or go to the Xerox
Supplies website for your printer: www.xerox.com/office/7500supplies.
Guidelines
• Do not open sealed packages of glossy paper until you are ready to load them into the printer.
• Leave glossy paper in the original wrapper, and store unopened packages in the original shipping
carton until ready to use.
• Remove all other paper from the tray before loading glossy paper.
• Load only the amount of glossy paper you plan to use and remove the unused portion from the
tray when you are finished printing. Replace the unused portion in the original wrapper and seal for
later use.
• Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy paper to
curl and jam in the printer.
To Next Page
Loading...
Need help?
General