CClleeaarriinngg BBooookklleett SSttaappllee JJaammss iinn tthhee OOffffiiccee FFiinniisshheerr LLXX
The booklet maker uses two staple cartridges. Booklet stapling requires that both staple cartridges
contain staples. A message appears on the control panel touch screen when the staple cartridge is
empty.
Caution: Do not perform this procedure while the printer is printing.
1. Open the finisher side cover.
2. If the staple cartridges are not visible, grasp the vertical panels on each side of the opening, then
slide the staple cartridges to the center.
3. Hold the tabs on both sides of the staple cartridge, then pull the cartridge out of the finisher.
Xerox
®
VersaLink
®
C70XX Color Multifunction Printer
User Guide
261
Troubleshooting
To Next Page
Loading...
Need help?
General
