Copy and Scan Problems
If the copy or scan quality is poor, refer to the following table.
Symptoms
Solutions
Lines or streaks only present in copies made from the
document feeder.
There is debris on the CVT glass. When scanning, the
paper from the document feeder passes over the
debris on the glass surfaces, resulting in lines and
streaks. Clean all glass surfaces with a lint-free cloth
dampened with water. For details, refer to Cleaning
the Scanner.
Spots present in copies taken from the document
glass.
There is debris on the document glass. When
scanning, the debris creates a spot on the image.
Clean all glass surfaces with a lint-free cloth
dampened with water.
Image is too light or too dark. Adjust the lighten/darken setting.
Image quality is poor when scanning color original
documents.
For best results, select Black & White output.
Colors are inaccurate. Adjust color settings and confirm that the correct
Original Type is set.
Perform the Scan Color Consistency procedure. For
details, refer to Color Registration.
If the problem persists, for online support information, go to www.xerox.com/office/VLC70XXsupport.
274
Xerox
®
VersaLink
®
C70XX Color Multifunction Printer
User Guide
Troubleshooting
To Next Page
Loading...
Need help?
General
