Browse Network for PC
Specify a destination PC by browsing your network. Selecting browse will displays a
hierarchy consisting of available server names and folders.
Specify Destination
Use this option to specify a destination PC using the screen keyboard, Enter information
in the fields provided for the selected protocol, to specify a forwarding destination.
How to Use the Scan to PC Feature
Using the Scan to PC Feature
Before performing the following procedure, ensure that a shared folder is created on
your computer; this folder is where the scanned data will be stored.
The Scan to PC service allows you to scan documents and send the scanned data to a
network computer using the FTP or SMB protocol.
1. From the UI, press the Clear All button.
2. Press the Home button.
3. Select Scan to PC.
4. Select the desired Transfer Protocol.
5. Select Save.
6. Choose the Save in destination where the data will be stored:
• Address Book; for instructions, refer to Using the Address Book to Specify a Scan
to PC Destination.
• Browse the network for a destination PC; for instructions, refer to Browsing the
Network for a Scan to PC Destination.
• Use the UI screen keyboard; for instructions, refer to Specifying a Scan to PC
Destination Using the UI Keyboard.
7. Load your original documents either in the document feeder or on the document
glass.
8. If desired, select Preview.
9. Select the desired scan options.
10. Press Start to begin scanning.
11. Retrieve the original documents from either the Document Feeder or the Document
Glass.
Using the Address Book to Specify a Scan to PC Destination
1. From the main Scan to PC tab window, select Address Book.
2. The Address Book was previously setup (contains address information):
• Yes: Continue to the next step
• No: See your System Administrator; only the administrator can setup entries in
the Address Book.
3. Select a recipient from the Name/Protocol list.
4. Select Add.
3-45Xerox
®
Versant
®
180 Press
User Guide
Press Apps
To Next Page
Need help?
General
