Xerox Wide Format 6604 User Manual

Color Calibration Processing Failure - error screen
• Ensure you are feeding a calibration target rather than another document into the
Scanner. Targets are marked with a title for identification.
• Check that the color calibration target is inserted in the correct orientation (loaded
face down and arrows forward).
• Ensure that the printer is not out of color ink.
• Ensure the color calibration target does not have streaks or blotches of ink.
• Ensure all color patches are present.
Mismatch session or wrong printer message displays in the following instances:
• If a calibrated target from a different printer was inserted inadvertently.
• If a calibration target from a different calibration session, other than the current one,
was inserted.
A possible solution is to verify the label on the calibration target matches the current
job. The label lists the identity of the calibration target.
Scan to Remote Printer
The Scan to Remote Printer feature allows users to submit scanned jobs to network
printers to be printed. You can also save commonly run jobs as Default Templates.
The remote printer destinations are set up using the Web Printer Management Tool.
See your System Administrator for more details on this feature.
Refer to the Xerox FreeFlow Accxes System and Web Printer Management Tool Setup
Guide or Help files in the Web Printer Management Tool for detailed instructions on
setup if needed.
Xerox
®
Wide Format 6604/6605 Solution
™
3-30
User Guide
Scanning Documents

Xerox Wide Format 6604 Specifications

General

Brand	Xerox
Model	Wide Format 6604
Category	Printer
Language	English