Xerox Wide Format 6604 User Manual

2. Select Scan to Mailbox.
3. Select the Advanced Settings tab.
4. Select Image Inversion.
5. Select Image Inversion or No Image Inversion.
6. Select Save when finished.
Scan Offset
When the Scan Offset feature is enabled, and a scan offset position is defined, the
machine will ignore image information from the lead edge to the scan offset position.
This enables you to eliminate unnecessary detail from the lead edge of an original.
The scan offset position can be set up from 0 to 36.0 inches, in 0.1 inch increments.
The factory default is Disabled.
• Disabled: Scan offset will not be applied to the original.
• Enabled: A scan offset equivalent to the dimension you specify will be applied to the
original when it is scanned.
1. Press the Services button on the Control Panel.
The Services menu will display with Scan to Mailbox as an option.
2. Select Scan to Mailbox.
3. Select the Advanced Settings tab.
Xerox
®
Wide Format 6604/6605 Solution
™
3-16
User Guide
Scanning Documents

Xerox Wide Format 6604 Specifications

General

Brand	Xerox
Model	Wide Format 6604
Category	Printer
Language	English