Xerox Wide Format 6604 User Manual

Original Type
Select the Original Type from the available options on the Basic Copy tab.
• Photo (Halftone)
• Photo (Contone)
• Text/Photo
• Text/Line
• Blue Line
Refer to Document Input in the Product Overview chapter, for details on copying special
original types.
Media Source
The Media Source selections enable you to select where the media for the copy job is
fed. The definition describing each selection under Media Source is that which is currently
loaded. The Media Source indicates the type of media that is currently loaded.
The factory default setting is Auto Select.
NOTE
If you prefer a different media series (ARCH, ANSI, etc.), go to Machine Info
> Media Status and Setup and change the series.
1. Select Copy on the Services menu.
2. Choose from the following Media Source selections:
• Auto Select: The machine automatically selects the correct media based on the
original size detected and the specified reduction and enlargement.
• Roll Media: Select from the roll media size(s) loaded in the Media Drawers.
• Cut Sheet Media: Cut sheet media is the media type which is loaded in the Manual
Feed-in Shelf (Bypass). The Media Feed-in Shelf is the last choice shown in the
column.
Output Format
The Output Format feature permits you to specify the media cut mode.
The factory default setting is Synchronized.
1. Select Copy on the Services menu.
2-11
Xerox
®
Wide Format 6604/6605 Solution
™
User Guide
Printing and Copying Documents

Xerox Wide Format 6604 Specifications

General

Brand	Xerox
Model	Wide Format 6604
Category	Printer
Language	English