Xerox Wide Format 6604 User Manual

5. Select Configure Timers . . .
The Set Timeout Duration screen displays.
6. Select Print Interrupt Timeout
The Print Interrupt Timeout screen displays.
7. Using either the scroll buttons or the numeric keypad, select the desired setting, and
then select Save.
8. Select Save to return to the Control Panel screen.
Set Start Scan Mode
You can select whether a document will begin scanning automatically once it is detected
by the Scanner, or whether it is necessary to press the Start button on the Control Panel
to initiate the scan after the document prefeeds.
The factory default setting is Automatic.
When you insert the document and manual start is enabled, you will not receive a
message to press the Start button.
1. Press the Services button on the Control Panel.
The Service menu displays.
2. Select Machine Info.
The Machine Info screen displays.
3. Select the Administration tab.
4. Select Control Panel.
The Control Panel screen displays.
5. Select Set scan start mode....
The Set Scan Start Mode screen displays.
6. Select the Automatic or Use Start key radio button.
• Automatic: Scanning starts automatically after an original is inserted into the
Scanner and prefeeds.
• Use Start key: You must press the Start button to initiate scanning after the
document prefeeds.
7. Select Save.
8. Select Close on the Control Panel screen to return to the Machine Info screen.
9. Select the Services button on the Control Panel and Copy if you intend to scan a
document at this time.
NOTE
Once this feature is enabled, users selecting options from the Services menu will
get a “press start” message.
5-19
Xerox
®
Wide Format 6604/6605 Solution
™
User Guide
System Administrator

Xerox Wide Format 6604 Specifications

General

Brand	Xerox
Model	Wide Format 6604
Category	Printer
Language	English