Xilinx ZC706 User Manual

ZC706 Evaluation Board User Guide www.xilinx.com 18
UG954 (v1.5) September 10, 2015
Feature Descriptions
DDR3 SODIMM Memory (PL)
[Figure 1-2, callout 2]
The memory module at J1 is a 1 GB DDR3 small outline dual-inline memory module
(SODIMM). It provides volatile synchronous dynamic random access memory (SDRAM) for
storing user code and data.
• Part number: MT8JTF12864HZ-1G6G1 (Micron Technology)
• Supply voltage: 1.5V
• Datapath width: 64 bits
• Data rate: Up to 1,600 MT/s
The DDR3 interface is implemented across the PL-side I/O banks. Bank 33 and bank 35 have
a dedicated DCI VRP/N resistor connection. An external 0.75V reference VTTREF_SODIMM is
provided for data interface banks. Any interface connected to these banks that requires the
VTTREF voltage must use this FPGA voltage reference. The connections between the DDR3
memory and the AP SoC are listed in Table 1-4.
PS Bank 500
VCCP1V8 1.8V
QSPI0,QSPI1
PS Bank 501 PHY_IF,SDIO_IF,USB_IF
PS Bank 502 PS_DDR3_IF
Notes:
1. The ZC706 evaluation board is shipped with V
ADJ
set to 2.5V.
Table 1-4: DDR3 SODIMM Socket J1 Connections to the XC7Z045 AP SoC
XC7Z045 (U1)
Pin
Net Name I/O Standard
DDR3 SODIMM Memory J1
Pin Number Pin Name
E10 PL_DDR3_A0 SSTL15 98 A0
B9 PL_DDR3_A1 SSTL15 97 A1
E11 PL_DDR3_A2 SSTL15 96 A2
A9 PL_DDR3_A3 SSTL15 95 A3
D11 PL_DDR3_A4 SSTL15 92 A4
B6 PL_DDR3_A5 SSTL15 91 A5
F9 PL_DDR3_A6 SSTL15 90 A6
E8 PL_DDR3_A7 SSTL15 86 A7
B10 PL_DDR3_A8 SSTL15 89 A8
J8 PL_DDR3_A9 SSTL15 85 A9
Table 1-3: I/O Voltage Rails (Cont’d)
XC7Z045 (U1)
Bank
Net Name Voltage Connected To
Send Feedback

Xilinx ZC706 Specifications

General

Brand	Xilinx
Model	ZC706
Category	Motherboard
Language	English