To Next Page

To Previous Page

116

Receiver

Circuit Type: Double Superheterodyne

Intermediate Frequencies: 1 st: 9.005 MHz (MAIN), 8.9000 MHz (SUB)

2 nd: 24 kHz (MAIN/SUB)

Sensitivity (TYP): SSB/CW (BW: 2.4 kHz/10 dB S+N/N)

1.8 MHz - 30 MHz 0.16 µV (AMP2 “ON”)

50 MHz - 54 MHz 0.125 µV (AMP2 “ON”)

70MHz - 70.5MHz 0.16µV (AMP2 “ON”)

AM (BW: 6 kHz/10dB S+N/N, 30% modulation @400 Hz)

0.5 MHz - 1.8 MHz 6.3 µV

1.8 MHz - 30 MHz 2 µV (AMP2 “ON”)

50 MHz - 54 MHz 1 µV (AMP2 “ON”)

70MHz - 70.5MHz 2µV (AMP2 “ON”)

FM (BW: 12 kHz, 12 dB SINAD)

28 MHz - 30 MHz 0.25 µV (AMP2 “ON”)

50 MHz - 54 MHz 0.2 µV (AMP2 “ON”)

70MHz - 70.5MHz 0.25 µV (AMP2 “ON”)

Squelch Sensitivity (TYP): SSB/CW/AM

2µV (1.8MHz - 30MHz, 50MHz - 54MHz) (AMP2 “ON”)

FM 0.25µV (28MHz - 30MHz) (AMP2 “ON”)

0.2µV (50MHz - 54MHz) (AMP2 “ON”)

Selectivity (WIDTH: Center): Mode –6 dB –60 dB

CW (BW: 0.5 kHz) 0.5 kHz or better 750 Hz or less

SSB (BW: 2.4 kHz) 2.4 kHz or better 3.6 kHz or less

AM (BW: 6 kHz) 6 kHz or better 15 kHz or less

FM (BW: 12 kHz) 12 kHz or better 25 kHz or less

IF Rejection: 60 dB or better (1.8 MHz - 28 MHz Amateur bands, VC-tune “ON”)

60 dB or better (50 MHz Amateur bands)

Image Rejection: 70 dB or better (1.8 MHz - 28 MHz Amateur bands)

60dB or better (50 MHz - 54 MHz Amateur bands)

Maximum Audio Output: 2.5 W into 4 ohms with 10 % THD

Audio Output Impedance: 4 to 16 ohms (4 ohms: nominal)

Conducted Radiation: Less than 4 nW

Specications are subject to change, in the interest of technical improvement, without notice or obligation,

and are guaranteed only within the amateur bands.

Symbol placed on the equipment

Direct current

Yaesu FTDX101MP User Manual

Other manuals for Yaesu FTDX101MP