65
Repeater Operation
The FTDX101 may be operated on 29 MHz and
50 MHz repeaters.
1. Press and hold the [MODE] key, and then
touch [FM].
2. Set to the desired repeater's output frequency
(downlink from the repeater).
3. Press the [FUNC] key.
4. Touch [RPT] .
5. Rotate the [MULTI] knob to select the desired
repeater shift direction. The selections are:
“SIMP” → “+” → “–” → “SIMP”
● To program the proper repeater shift, use
Menu items “RPT SHIFT(28MHz)” (page
88) and “RPT SHIFT(50MHz)” (page
88), as appropriate.
6. Press the [FUNC] key.
7. Touch [ENC/DEC] .
8. Rotate the [MULTI] knob to select “ENC”.
9. Press the [FUNC] key.
10. Touch [TONE FREQ] .
11. Rotate the [MULTI] knob to select the de-
sired CTCSS Tone to be used. A total of 50
standard CTCSS tones are provided (see the
CTCSS Tone Chart).
Press and hold the microphone PTT switch to be-
gin transmission.
Tone Squelch Operation
The “Tone Squelch” may be activated to keep the
receiver silent until an incoming signal modulated
with a matching CTCSS tone is received. The
receiver squelch will then open in response to re-
ception of the required tone.
1. Press and hold the [MODE] key, and then
touch [FM].
2. Set the transceiver to the desired frequency.
3. Press the [FUNC] key.
4. Touch [ENC/DEC] .
5. Rotate the [MULTI] knob to select “TSQ”.
6. Press the [FUNC] key.
7. Touch [TONE FREQ] .
8. Rotate the [MULTI] knob to select the de-
sired CTCSS Tone to be used. A total of 50
standard CTCSS tones are provided (see the
CTCSS Tone Chart).
CTCSS Tone Frequency (Hz)
67.0 69.3 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5 94.8 97.4
100.0 103.5 107.2 110.9 114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2
151.4 156.7 159.8 162.2 165.5 167.9 171.3 173.8 177.3 179.9 183.5 186.2
189.9 192.8 196.6 199.5 203.5 206.5 210.7 218.1 225.7 229.1 233.6 241.8
250.3 254.1 - - - - - - - - - -
FM Mode Operation
To Next Page
Loading...
Need help?
General
