To Next Page

To Previous Page

Power Cable Connections

• FTDX101MP

Refer to the illustration for the proper connection of the FPS-101 Power Supply.

Use the DC power cable supplied with the FTDX101MP to make the power connection to the FPS-101

power supply.

• Connect the FTDX101MP and FPS-101 with the supplied speaker cable so audio can be output from the

FPS-101’s built-in speaker.

• When connected to EXT SPKR terminal “A”, audio of “MAIN band and SUB band” will be output from the

built-in speaker of FPS-101.

• When connected to EXT SPKR terminal “B”, audio of “MAIN band” is output from the built-in speaker of

FPS-101, and audio of “SUB band” is output from the speaker of the FTDX101MP.

DC Power Cable (supplied)

Speaker Cable (supplied)

Connected to the

AC line outlet

Connecting the DC power cable (USA version only)

Connect the DC Power Cable using the supplied Cable brackets (with Cable clamps), referring to the

gures below.

Screw (3x8)

FTDX101MP FPS-101

Cable bracket

(with Cable clamp)

Cable bracket

(with Cable clamp)

Screw (3x8)

Yaesu FTDX101MP User Manual

Other manuals for Yaesu FTDX101MP