To Next Page

To Previous Page

6D93G11

5-16

18. Install the stator assembly and Woodruff

key.

19. Install the flywheel magnet.

CAUTION:

Apply force in the direction of the arrows

shown to prevent the flywheel holder from

slipping off easily.

NOTE:

Apply engine oil to the flywheel magnet nut

before installation.

20. Install the flywheel magnet cover.

Removing the power unit

NOTE:

It is recommended to loosen the flywheel

magnet nut before removing the power unit to

improve working efficiency.

1. Remove the flywheel magnet cover.

2. Disconnect the battery leads.

3. Remove the junction box cover, and then

disconnect the PTT motor leads and PTT

switch coupler.

4. Disconnect the throttle cable and shift

cable.

5. Disconnect the fuel hose and shift posi-

tion switch coupler.

6. Disconnect the cooling water pilot hose,

canister hose, and flushing hose.

7. Remove the oil dipstick.

8. Remove the apron

, and then remove

the power unit by removing the bolts

9. Remove the flywheel magnet.

Flywheel holder: 90890-06522

Flywheel magnet nut:

215 N·m (21.5 kgf·m, 158.6 ft·lb)

S6D85350

Power unit

Yamaha F100D Service Manual

Other manuals for Yamaha F100D