Trouble Recovery
96
EMU29524
Power trim and tilt will not operate
If the engine cannot be tilted up or down with
the power trim and tilt because of a dis-
charged battery or a failure with the power
trim and tilt unit, the engine can be tilted
manually.
1. Loosen the manual valve screw by turn-
ing it counterclockwise until it stops.
2. Put the engine in the desired position,
then tighten the manual valve screw by
turning it clockwise.
1. Fuse (20 A 3, 30 A)
2. Spare fuse (20 A 3, 30 A)
3. Fuse puller
1. Fuse (15A, 20 A, 30 A)
2. Spare fuse (15A, 20 A, 30 A)
3. Fuse puller
1. Fuse puller
1. Manual valve screw
6C1-9-26-1E0.book 96 ページ 2010年2月10日 水曜日 午後1時53分