Maintenance
73
proper specification. For information on
spark plug installation, see page 82.
2. Change the gear oil. For instructions,
see page 87. Inspect the oil for the pres-
ence of water that indicates a leaky seal.
Seal replacement should be performed
by an authorized Yamaha dealer prior to
use.
3. Grease all grease fittings. For further de-
tails, see page 79.
For long-term storage, fogging the engine
with oil is recommended. Contact your
Yamaha dealer for information about fogging
oil and procedures for your engine.
EMU28444
Flushing power unit
Perform this procedure right after operation
for the most thorough flushing.
ECM01530
Do not perform this procedure while the
engine is running. The water pump may
be damaged and severe damage from
overheating can result.
1. After shutting off the engine, unscrew
the garden hose connector from the fit-
ting on the bottom cowling.
1. Fitting
2. Garden hose adapter
3. Garden hose connector
6C1-9-26-1E0.book 73 ページ ２０１０年２月１０日 水曜日 午後１時５３分
To Next Page
Loading...
Need help?
General
