Instruments and indicators
35
Stop the engine immediately if the buzzer
sounds and the overheat alert device has ac-
tivated. Check the cooling water inlet for
clogging.
ECM01593
Do not continue to run the engine if the
overheat-alert indicator blinks. Serious
engine damage will occur.
Do not continue to operate the engine if
a alert device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
EMU36151
Water separator alert
This indicator will blink if water has accumu-
lated in the water separator (fuel filter) while
cruising. In such an event, stop the engine
immediately and see page 90 of this manual
to drain the water from the fuel filter. Get
back to the port soon and consult a Yamaha
dealer immediately.
ECM00911
Gasoline mixed with water could cause
damage to the engine.
EMU36161
Engine trouble alert
This indicator will blink if the engine malfunc-
tions while cruising. Get back to the port
soon and consult a Yamaha dealer immedi-
ately.
ZMU05424
6BG-9-78-1E0.book 35 ページ ２０１４年１１月２０日 木曜日 午後３時３分
To Next Page
Loading...
Need help?
General
