Operation
61
3. Push the tilt support knob into the clamp
bracket to support the engine. WARN-
ING! After tilting the outboard motor,
be sure to support it with the tilt sup-
port knob or tilt support lever. Other-
wise the outboard motor could fall
back down suddenly if oil in the pow-
er trim and tilt unit or in the power tilt
unit loses pressure.
[EWM00263] NOTICE:
Do not use the tilt support lever or
knob when trailering the boat. The
outboard motor could shake loose
from the tilt support and fall. If the
motor cannot be trailered in the nor-
mal running position, use an addi-
tional support device to secure it in
the tilt position. For more detailed in-
formation, see page 66.
[ECM01642]
EMU34481
Procedure for tilting down (hydro tilt
models)
1. Release the tilt lock lever.
2. Hold the rear of the top cowling with one
hand, tilt the outboard motor up slightly
and pull out the tilt support knob or re-
turn the tilt support lever.
UP
6BG-9-78-1E0.book 61 ページ ２０１４年１１月２０日 木曜日 午後３時３分
To Next Page
Loading...
Need help?
General
