EasyManuals Logo

Yamaha F60 User Manual

Yamaha F60
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
Specifications and requirements
21
dition, gasoline used for boating will typically
age longer between refills than gasoline
used in automobiles, resulting in stale and
unusable gasoline that may cause starting
and running problems, fuel system damage,
and internal engine damage.
Yamaha recommends the use of two Ya-
malube gasoline additives to reduce internal
deposits and extend the storage life of gaso-
line. Continuous use of Yamalube Ring Free
Fuel Additive Plus reduces harmful internal
deposits. Yamalube Fuel Stabilizer & Condi-
tioner Plus added to fresh gasoline will help
protect the fuel system from varnishing while
helping to keep the gasoline’s octane level
from decreasing excessively during storage.
Other additives may also be available on the
market that may have varying degrees of ef-
fectiveness. Consult your Yamaha dealer
concerning what may work best for the local-
ly available gasoline and environmental con-
ditions.
EMU41350
Anti-fouling paint
A clean hull is required to maintain your
boat’s performance. Boats moored in the wa-
ter should be protected from marine growth
(barnacles, mussels, and marine plants). If
approved by regulations for your area, the
bottom of the hull can be coated with an anti-
fouling paint to inhibit marine growth.
Anti-fouling paints specifically formulated for
use on aluminum may be applied to the out-
board motor. The original Yamaha paint sur-
face may be scuffed lightly before applying
anti-fouling paint, but do not remove the orig-
inal paint. Removal of the original paint will
increase the rate of corrosion.
NOTICE
ECM02410
Anti-fouling paint for fiberglass and wood
may contain materials, such as copper,
graphite, and tin, that can cause corro-
sion if applied to aluminum boats and
outboard motor components. Never ap-
ply these types of paint to your outboard
motor because rapid corrosion damage
could occur.
Sacrificial anodes are attached to the out-
board motor to provide corrosion protection
and must never be painted.
NOTICE
ECM02420
Painted sacrificial anodes will not provide
corrosion protection.
EMU36341
Motor disposal requirements
Never illegally discard (dump) the motor.
Yamaha recommends consulting the dealer
about discarding the motor.
EMU36352
Emergency equipment
Keep the following items onboard in case
there is trouble with the outboard motor.
A tool kit with assorted screwdrivers, pli-
ers, wrenches (including metric sizes), and
electrical tape.
Waterproof flashlight with extra batteries.
An extra engine shut-off cord (lanyard)
with clip.
Spare parts, such as an extra set of spark
6C1-9-3B-1E0.book 21 ージ 012年11月19日 月曜日 午前10時35分

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha F60 and is the answer not in the manual?

Yamaha F60 Specifications

General IconGeneral
Displacement996cc
Prop Shaft Horsepower60 hp
Full Throttle RPM Range5000-6000 rpm
Fuel Induction SystemEFI (Electronic Fuel Injection)
Ignition SystemTCI
Starting SystemElectric
SteeringRemote
Bore x Stroke65.0 mm x 75.0 mm
Recommended FuelRegular unleaded gasoline (min 87 octane)
Shaft Length20 in
Engine Type4-stroke, SOHC

Related product manuals