Yamaha F60 User Manual

50
Engine control system
EMU26803
Alert system
NOTICE
ECM00091
Do not continue to operate the engine if a
alert device has activated. Consult your
Yamaha dealer if the problem cannot be
located and corrected.
EMU2681C
Overheat alert
This engine has an overheat-alert device. If
the engine temperature rises too high, the
alert device will activate.
 The engine speed will automatically de-
crease to about 2000 r/min.
 The overheat-alert indicator will light or
blink.
 The buzzer will sound (if equipped on the
tiller handle, remote control box, or main
switch panel).
If the alert system has activated, stop the en-
gine and check the cooling water inlets:
 Check trim angle to be sure that the cool-
ing water inlet is submerged.
 Check the cooling water inlet for clogging.
ZMU05028
ZMU07103
6C1-9-3B-1E0.book 50 ページ ２０１２年１１月１９日 月曜日 午前１０時３５分

Yamaha F60 Specifications

General

Displacement	996cc
Prop Shaft Horsepower	60 hp
Full Throttle RPM Range	5000-6000 rpm
Fuel Induction System	EFI (Electronic Fuel Injection)
Ignition System	TCI
Starting System	Electric
Steering	Remote
Bore x Stroke	65.0 mm x 75.0 mm
Recommended Fuel	Regular unleaded gasoline (min 87 octane)
Shaft Length	20 in
Engine Type	4-stroke, SOHC