EasyManuals Logo

Yamaha F60 User Manual

Yamaha F60
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
Instruments and indicators
45
mediately.
TIP:
To stop the buzzer, press the “ ” (set) or
” (mode) button.
EMU37690
Adjusting trolling speed
You can adjust the trolling speed randomly
by increasing or decreasing it approximately
50 r/min. When in the trolling speed setting
mode, the display switches to the normal dis-
play when the engine speed is increased
(within 3000 r/min) using the throttle. When
the throttle is closed, the display returns to
the trolling speed setting mode. For details,
see the attached operation manual.
TIP:
Trolling is affected by currents and other
operating conditions and may differ from
the actual engine speed.
The default engine idle speed is reset au-
tomatically when the display is switched to
the normal display. The default engine idle
speed is also reset automatically when the
engine is turned off or when the engine
speed exceeds 3000 r/min.
When warming up a cold engine, the troll-
ing speed cannot be decreased below the
specified engine idle speed.
EMU36130
Low oil pressure-alert
If the engine oil pressure drops too low, the
low oil pressure-alert indicator will start to
blink, and the engine speed will automatical-
ly decrease to about 2000 r/min.
Stop the engine immediately if the buzzer
sounds and the low oil pressure-alert indica-
tor blinks. Check the engine oil quantity and
replenish oil if necessary. If the alert device
has activated while the appropriate engine
oil quantity is maintained, consult your
Yamaha dealer.
ZMU05931
ZMU06309
ZMU05430
ZMU05431
6C1-9-3B-1E0.book 45 ージ 012年11月19日 月曜日 午前10時35分

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha F60 and is the answer not in the manual?

Yamaha F60 Specifications

General IconGeneral
Displacement996cc
Prop Shaft Horsepower60 hp
Full Throttle RPM Range5000-6000 rpm
Fuel Induction SystemEFI (Electronic Fuel Injection)
Ignition SystemTCI
Starting SystemElectric
SteeringRemote
Bore x Stroke65.0 mm x 75.0 mm
Recommended FuelRegular unleaded gasoline (min 87 octane)
Shaft Length20 in
Engine Type4-stroke, SOHC

Related product manuals