EasyManuals Logo

Yamaha HTR-6130 User Manual

Yamaha HTR-6130
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Quick start guide
7 En
INTRODUCTION
English
1 Turn on the video monitor and then set the
input source selector of the video monitor to
this unit.
2 Press ASTANDBY/ON on the front panel.
3 Press PSCENE 1.
“DVD Viewing” appears in the front panel display,
and this unit automatically optimize own status for
the DVD playback.
y
The indicator on the selected SCENE button lights up while
this unit is in the SCENE mode.
4 Start playback of the desired DVD on your
player.
5 Rotate HVOLUME to adjust the volume.
When you change the input source or sound field program, the
SCENE mode is deactivated and the indicator on the SCENE
button turns off.
About SCENE function
Just by pressing one SCENE button, you can turn on this
unit and recall your favorite input source and sound field
program according to the SCENE template that has been
assigned to the SCENE button. The SCENE templates are
built combinations of input sources and sound field
programs.
y
If you connect a Yamaha product that has capability of the
SCENE control signals, this unit can automatically activate the
component and start playback. Refer to the instruction manual of
the DVD player for further information.
Using the other SCENE buttons
Step 3: Turn on the power and
press SCENE 1 button
Check the type of the connected speakers.
If the speakers are 6 ohm speakers, set “SP IMP.” to
“6MIN” before using this unit (see page 12).
Note
Default
SCENE
button
The name of the SCENE template
and its description
SCENE
1
DVD Viewing
input source: DVD
sound field program: STRAIGHT
For when you want to listen to a music disc from
the connected DVD player as the background
music for this room.
SCENE
2
Disc Listening
input source: DVD
sound field program: 5ch Stereo
For when you want to listen to a music disc from
the connected DVD player as the background
music for this room.
SCENE
3
TV Viewing
*1
input source: DTV/CBL
sound field program: STRAIGHT
For when you want to watch a TV program.
SCENE
4
Radio Listening
*2, *3, *4
input source: TUNER
sound field program: Music Enh. 5ch
For when you want to listen to a music program
from the FM radio station

Table of Contents

Other manuals for Yamaha HTR-6130

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha HTR-6130 and is the answer not in the manual?

Yamaha HTR-6130 Specifications

General IconGeneral
Channels5.1
HDMI Inputs2
HDMI Outputs1
Dolby DigitalYes
DTSYes
FM/AM TunerYes
Response Bandwidth10 Hz - 100 kHz
Signal-To-Noise Ratio100 dB
Total Harmonic Distortion0.9%
Input Impedance47 kOhm
Input Sensitivity200 mV
Audio D/A Converter192kHz/24-bit
Surround System Class5.1 channel
Digital Sound Processor (DSP)Yes
DSP Preset Qty17
Tuner BandsAM/FM
Preset Station Qty40
HDMIYes
Frequency Response10 Hz - 100 kHz
Dimensions435 x 151 x 315 mm
Additional FeaturesCompressed Music Enhancer
Connector TypeHDMI
Video Inputs/Outputs2 HDMI inputs, 1 HDMI output, Composite video inputs/outputs
Audio Inputs/Outputsdigital audio input (optical)

Related product manuals