Yamaha Mio User Manual

3 - 43
CHK
ADJ
REPLACING THE HEADLIGHT BULB/
ADJUSTING THE HEADLIGHT BEAM
4. Install:
• headlight bulb
Secure the new headlight bulb with the
headlight bulb holder.
CAUTION:
_
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be
adversely affected. If the headlight bulb
gets soiled, thoroughly clean it with a cloth
moistened with alcohol or lacquer thinner.
5. Install:
• headlight bulb holder
6. Install:
• headlight assembly
Refer to “INSTALLING THE HEADLIGHT
ASSEMBLY”.
New
EAS00186
ADJUSTING THE HEADLIGHT BEAM
1. Adjust:
• headlight beam (vertically)
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Loosen the bolt 1.
b. Slide the bottom of the headlight unit for-
ward a or backward b.
c. Tighten the bolt.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
Slide forward
a
Headlight beam is
raised.
Slide backward
b
Headlight beam is
lowered.
a
b
1

Yamaha Mio Specifications

General

Brand	Yamaha
Model	Mio
Category	Scooter
Language	English