Yamaha Mio User Manual

4 - 59
ENG
STARTER CLUTCH
3. Check:
• starter clutch operation
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Install the starter wheel gear 1 onto the
starter clutch 2 and hold the starter clutch.
b. When turning the starter wheel gear clock-
wise È, the starter clutch and the starter
wheel gear should engage, otherwise the
starter clutch is faulty and must be
replaced.
c. When turning the starter wheel gear coun-
terclockwise É, it should turn freely, other-
wise the starter clutch is faulty and must be
replaced.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
È
É
1
2
EAS00355
INSTALLING THE STARTER CLUTCH
1. Install:
• bearing
NOTE:
Apply a thin coat of grease to the needle bear-
ing.
2. Install:
• starter wheel gear 1
• starter clutch assembly 2
NOTE:
_
• Pour a few drops of molybdenum disulfide oil
on the areas of the starter clutch shown.
• When installing the starter clutch assembly,
turn the starter wheel gear in the direction of
the arrow shown.
Recommended lubricant
Lithium-soap-based grease
Recommended lubricant
Molybdenum disulfide oil
M

Yamaha Mio Specifications

General

Brand	Yamaha
Model	Mio
Category	Scooter
Language	English