| Advanced Call Features | 24
2.
Do one of the following:
• If you want to park the call against the local extension, press the # key.
• If you want to park the call against the desired extension, enter the extension (for example, 4606) where you
want to park the call and press the # key.
If the call is parked successfully, you will hear a voice prompt that the call is parked.
Retrieving a Parked Call in the FAC Mode
You can retrieve a parked call in the FAC mode from any phone within your network.
Your system administrator has set call park in the FAC mode. There is a call parked on the extension. Get the park
retrieve code from your system administrator.
1.
Dial the park retrieve code.
2.
Follow the voice prompt to retrieve:
• Press the # key on the phone where the call is parked.
• Enter the desired extension followed by # (for example, 4606#) on any phone.
Parking or Retrieving a Call in the Transfer Mode
You can park the call to the shared parking lot through a blind transfer.
For some servers, the system will return a specific retrieve park number (park retrieve code) after parking
successfully.
Parking a Call in the Transfer Mode
You can park a call in the transfer mode directly. When you park a call to the shared parking lot, the call is held on
your phone.
Your system administrator has set call park in the Transfer mode.
During a call, .
The call will be directly transferred to the shared parking lot.
Retrieving a Parked Call in the Transfer Mode
You can retrieve a parked call in the transfer mode from any phone in the same network.
Your system administrator has set call park in the Transfer mode. There is a call parked on the shared parking lot.
Dial the park retrieve code.
The phone will retrieve the parked call from the shared parking lot.
Note: can use a Retrieve key to retrieve a parked call directly.
Related tasks
Retrieving a Call with a Retrieve Key
Shared Call Appearance (SCA)
Yealink phone supports using Shared Call Appearance (SCA) to share a line. So that this line can be registered on
more than one phone at the same time. Your system administrator can set your phone to use the shared line.
Placing Calls on a Shared Line
You can place one or multiple calls on a shared line.
Related information
Placing Calls
To Next Page
Loading...
Need help?
General
