Yealink SIP-T46S Configuration Guide

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 47 OF 150
5 Device Management
The BroadWorks Device Management feature provides the capability to automate
generation of device configuration files to support mass deployment of devices. This
section identifies the device management capabilities supported by the Yealink T4x IP
Phone and the configuration steps required. For Device Management configuration
details not covered here, see the BroadWorks Device Management Configuration Guide
[2] and the BroadWorks CPE Kit Usage Guide [8].
5.1 Device Management Capabilities Supported
The Yealink T4x IP Phone has completed Device Management interoperability testing with
BroadWorks using the BroadWorks Device Management Interoperability Test Plan [7].
The results are summarized in the following table.
The BroadWorks test plan is composed of packages, each covering distinct
interoperability areas. Each package is composed of one or more test items, which in
turn, are composed of one or more test cases. The test plan exercises the Device
Management interface between the device and BroadWorks with the intent to ensure
interoperability.
The Supported column in the following table identifies the Yealink T4x IP Phone’s support
for each of the items covered in the test plan packages, with the following designations:
 Yes Test item is supported
 No Test item is not supported
 NA Test item is not applicable
 NT Test item was not tested
 No* Test item is supported only in limited capacity and does not fully comply with
BroadWorks requirements
Caveats and clarifications are identified in the Comments column.
NOTE: DUT in the following table refers to the Device Under Test, which in this case is the
Yealink T4x IP Phone.
BroadWorks Device Management Interoperability Test Plan Support Table
Test Plan Package Test Plan Package Items Supported Comments
HTTP File
Download
HTTP Download Using XSP IP
Address
Yes
HTTP Download Using XSP FQDN Yes
HTTP Download Using XSP Cluster
FQDN
Yes
HTTP Download With Double Slash Yes
HTTPS File
Download
HTTPS Download Using XSP IP
Address
Yes
HTTPS Download Using XSP FQDN Yes

Yealink SIP-T46S Specifications

General

Manual	Yes
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Voice codecs	CNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity	16 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Volume control	Digital
Number of programmable keys	10
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm
Package depth	255 mm
Package width	274 mm
Package height	128 mm