YOKOGAWA SMARTDAC+ GX10 User Manual

2-72
IM 04L51B01-01EN
2.7.3 CheckingFTPFileTransfers(FTPtransmissiontest)
You can check whether files can be sent from the GX/GP to the FTP server using a test file.
Procedure
1 Press MENU.
The menu screen appears.
2 Tap the Universal tab and then FTP test.
The FTP transmission test screen appears.
3 Tap Primary or Secondary.
The test le is sent.
Operation complete
Items to Check before Performing This Test
• Connect the Ethernet cable correctly. For the connection procedure, see section 3.6,
“Optional Terminal Wiring” in the First Step Guide.
• Check that the Ethernet interface settings are correct.
For the setup procedure, see
page 1-143 in section 1.17, “Configuring the Ethernet Communication Function”.
Checking the Results of the FTP Test
• When an FTP test is executed, a test file named FTP_TEST.TXT is transferred to the
specified FTP destination directory.
• You can also check the result of an FTP test using the FTP log (
see page 2-45
in section 2.3.5, “Displaying Logs”), Web display (
see section 3.1, “Using the Web
Application to Change the GX/GP Settings, Monitor Data, and Control the GX/GP (Web
server function)”), and FLog command (see the setting commands in the communication
command manual).
2.7.4 AdjustingtheClockManually(SNTPtimeadjustment)
You can adjust the clock manually through touch operation. The SNTP client must be
enabled.
For details on the SNTP function, see page 1-151 in section 1.17.5, “Setting the SNTP
Client Function”.
Procedure
1 Press MENU.
The menu screen appears.
2 Tap the Universal tab and then SNTP.
The clock is adjusted.
Operation complete
2.7 Performing Network Related Operations

YOKOGAWA SMARTDAC+ GX10 Specifications

General

Brand	YOKOGAWA
Model	SMARTDAC+ GX10
Category	Voice Recorder
Language	English