YOKOGAWA SMARTDAC+ GX10 User Manual

2-79
IM 04L51B01-01EN
Operating the GX/GP
1
2
3
4
5
App
Index
Logging Out
• UsingTouchOperation
1 Press MENU.
The menu screen appears.
2 Tap the Universal tab and then Logout.
You are logged out. The user name disappears from the status display section.
Operation complete
• AutoLogout
If auto logout is enabled, you will be logged out when there is no key or touch operation
for the specified length of time.
2.10.2 ChangingthePassword
You can carry out this procedure when in Security settings, under Basic settings, Security
Touch operation is set to Login.
Procedure
1 Press MENU.
The menu screen appears. If OperationwithoutLogin is set to OFF, a password input screen
will appear.
2 Tap the Universal tab and then Changepassword.
The screen for changing the password appears.
3 Tap OldPassword, and enter the old password.
4 Tap NewPassword, and enter the new password.
5 Tap NewPasswordAgain, and enter the new password.
6 Tap OK.
The screen closes, and the new password takes effect.
7 Tap the Exit icon to close the menu screen.
Operation complete
Note
Default password: default
For the default password when you are using the advanced security function (/AS option), see
section 2.3.1, “Logging In,” in the Advanced Security Function (/AS) User’s Manual (IM 04L51B01-
05EN).
2.10 Allowing Only Registered Users to Operate

YOKOGAWA SMARTDAC+ GX10 Specifications

General

Brand	YOKOGAWA
Model	SMARTDAC+ GX10
Category	Voice Recorder
Language	English