York YHVP - Network Management System: NET Program; NET Program Overview; NET Program Capabilities

34
YHVP/YHVP-ECM
YHVP/YHVP-ECM Serie
NET program for managing a network of York MB fan coils
NET is a centralised control system for networks of York MB
fan coils, based on software that runs on LINUX™ operating
system (the program is provided pre-installed on a PC).
The NET software offers a practical and economical solution
for managing the units, with the simple click of the mouse.
The main characteristics include simplicity of use, an extremely
complete and functional weekly program, and the possibility
to access the historical operating data for each individual
appliance connected.
The program exploits all the potential of our units with remote
controls, representing an addition to the latter.
The NET program is a control tool that can be used as a
replacement for the remote control, or in parallel, however the
settings made using NET can have priority over those made
using the remote control.
The program can be used to:
• Create uniform groups (groups of units on individual oors, in ofces or rooms).
• Save weekly programs congured for different types of operation (summer, winter, mid seasons, closing periods etc.); these
can then be recalled and activated with a simple click of the mouse.
Weekly on/off cycles can be set for individual units or groups of units.
• Set the operating conditions for each individual unit or groups of units (operating mode, fan speed, temperature setting).
• Set the set point limits for each individual unit or groups of units.
• Switch each individual unit or groups of units ON or OFF.
Management system for a network
of units
Description ID Code
Hardware/software supervisory system (to be used with MB board only) NET 9079118