122 Z4Mplus and Z6Mplus User Guide
Specifications
AC Power Cord
AC Power Cord
Power Line Cord Specifications
• The overall length must be less than 9.8 ft. (3.0 m).
• It must be rated for at least 5A, 250 VAC.
• The chassis ground (earth) MUST be connected to ensure safety and reduce
electromagnetic interference. The ground connection is handled by the third wire
(earth) in the power cord as shown below.
• The AC power plug and IEC 320 connector must bear the certification mark of at
least one of the known international safety organizations shown below.
Caution • For personnel and equipment safety, always use a three-prong plug with
an earth ground connection to the AC power source.
Note • Since many areas of the world have specific power requirements, an AC
power cord may not be included with your printer. The power cord must meet your
local electrical requirements.
AC Power plug
for your country
3 conductor
<HAR> cable
IEC 320
connector
Contact
view
Neutral
Earth
Live
+
R
To Next Page
Loading...
Need help?
General
