EasyManuals Logo
Home>Zebra>Printer>ZM400

Zebra ZM400 User Manual

Zebra ZM400
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
About This Document
Who Should Use This Document
10
P1016807-001 Rev. A ZM400 User Guide for UPS 2/26/10
Who Should Use This Document
This User Guide for UPS is intended for use by any person who needs to operate or to
troubleshoot problems with the printer.
How This Document Is Organized
The User Guide for UPS is set up as follows:
Section Description
Introduction on page 15 This section shows the operational controls and
location of major components used when loading
media.
Printer Setup on page 21 This section provides the tasks that you must
complete and the issues that you must consider
before you load and configure your printer.
Operations on page 33 This section provides the procedures for loading
and calibrating the printer.
Configuration on page 47 This section describes the control panel parameters
that are used to configure the printer for operation.
Routine Maintenance on page 75 This section provides routine cleaning and
maintenance procedures.
Troubleshooting on page 85 This section provides information about errors that
you might need to troubleshoot. Assorted
diagnostic tests are included.
Specifications on page 105 This section provides the features of and
specifications for the printer.

Table of Contents

Other manuals for Zebra ZM400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra ZM400 and is the answer not in the manual?

Zebra ZM400 Specifications

ZM400

Printer Specifications IconPrinter Specifications
resolution203 dpi/8 dots per mm, 300 dpi/12 dots per mm, 600 dpi/24 dots per mm
print width4.09”/104 mm
print length157”/3, 988 mm with 203 dpi, 73”/1, 854 mm with 300 dpi, 39”/991 mm with 600 dpi
maximum label and liner width4.5”/114 mm
ribbon width2.00”/51 mm to 4.33”/110 mm
Environmental IconEnvironmental
operating temperature32º F/0º C to 104º F/40º C (Direct Thermal), 40º F/5º C to 104º F/40º C (Thermal Transfer)
storage temperature-40º F/-40º C to 140º F/60º C
operating humidity20-85% non-condensing
storage humidity5-85% non-condensing
Weight and Dimensions IconWeight and Dimensions
width10.9”/278 mm
height13.3”/338 mm
depth18.7”/475 mm
weight32.4 lbs/15 kg
shipping weight49 lbs/22 kg

ZM600

Printer Specifications IconPrinter Specifications
resolution203 dpi/8 dots per mm, 300 dpi/12 dots per mm
print width6.6”/168 mm
print length102”/2, 590 mm with 203 dpi, 45”/1, 143 mm with 300 dpi
maximum label and liner width7.0”/178 mm
ribbon width2.00”/51 mm to 6.85”/174 mm
Environmental IconEnvironmental
operating temperature32º F/0º C to 104º F/40º C (Direct Thermal), 40º F/5º C to 104º F/40º C (Thermal Transfer)
storage temperature-40º F/-40º C to 140º F/60º C
operating humidity20-85% non-condensing
storage humidity5-85% non-condensing
Weight and Dimensions IconWeight and Dimensions
width10.9”/278 mm
height13.3”/338 mm
depth18.7”/475 mm
weight32.4 lbs/15 kg
shipping weight49 lbs/22 kg

Related product manuals