Zebra ZM400 User Manual

Operations
Load Media
36
P1016807-001 Rev. A ZM400 User Guide for UPS 2/26/10
Load Media
The beginning steps for loading media apply to all printers, including those that have the
peel-off option. When you have completed these beginning steps, continue with the media
loading instructions for the print mode and printer options that apply to you. For more
information about print modes and printer options, see Print Modes and Printer Options
on page 34.
To begin loading media for all print modes and printer options, complete these
steps:
1. Press the printhead release latch to open the printhead assembly. Lift the printhead until it
latches open.
2. Slide out the media guide.
Caution • While performing any tasks near an open printhead, remove all rings, watches,
hanging necklaces, identification badges, or other metallic objects that could touch the
printhead. You are not required to turn off the printer power when working near an open
printhead, but Zebra recommends it as a precaution. If you turn off the power, you will lose
all temporary settings, such as label formats, and you must reload them before you resume
printing.

Zebra ZM400 Specifications