3
Introduction
Read this User Guide carefully and thoroughly before operating Zortrax products for the rst time. The
User Guide includes basic information about the 3D printer, safety and protection guidelines as well
as advice on preparing the machine for the rst printing and basic maintenance work. Ignorance and
non-compliance with these instructions may result in property damage, injuries, device failures or lower
quality of 3D prints. It is also necessary to ensure that every 3D printer user knows, fully understands and
follows the instructions provided in this User Guide.
The Manufacturer makes every eort to ensure that Zortrax products are safe in transportation, installa-
tion, usage, storage and disposal.
However, due to the lack of direct and ad hoc control as well as other conditions inuencing the device
and those that are beyond the Manufacturer’s knowledge, the Manufacturer is not responsible for dam-
ages, injuries, failures and costs resulting from improper transportation, installation, usage, storage and
disposal.
Furthermore, the users should take into consideration the risk of possible faults of the device resulting
from defects in material and workmanship.
Intended Use of Zortrax Printers
Zortrax 3D printers work in the Layer Plastic Deposition (LPD) technology, in which a previously melted
material is deposited on a surface layer by layer in order to form a pre-designed shape. The extruder is
equipped with three heating points, which allows the melted material to exit the nozzle and be deposit-
ed onto the heated platform without causing blockages. Zortrax 3D printers, together with Z-SUITE and
dedicated materials, make it possible to achieve high quality prints, however, the users are responsible
for qualifying and determining the intended use of 3D printed models. The Manufacturer takes no re-
sponsibility for any use of the printed objects, especially, when these objects constitute a part of safety
equipment or strictly regulated medical, military or space science equipment.
Due to the size and specicity, Zortrax devices are not intended for use by children under the age of 14
and by people with reduced manual, motor and psychomotor skills. The Manufacturer recommends pro-
viding assistance and guidance to people with disabilities and older adults who wish to operate Zortrax
printers.
To Next Page
Loading...
Need help?
General
