zortrax M Series User Manual

©2018, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following document are registered
trademarks of Zortrax and are subject to legal protection.
49
Specication
Weight and Physical Dimensions
M200 M300
Without a Spool (W x D x H) 350 x 360 x 505 mm
[13.8 x 14.2 x 19.9 in]
473 x 488 x 665 mm
[18.6 x 19.2 x 26.2 in]
With a Spool 350 x 440 x 505 mm
[13.8 x 17.3 x 19.9 in]
473 x 570 x 665 mm
[18.6 x 22.4 x 26.2 in]
Shipping Box 470 x 480 x 570 mm
[18.5 x 18.9 x 22.4 in]
576 x 576 x 842 mm
[22.7 x 22.7 x 33.1 in]
Shipping Weight 26 kg [57.3 lb] 50 kg [110 lb]
Net Weight 14.5 kg [32 lb] 27 kg [59.5 lb]
Printing
Technology LPD (Layer Plastic Deposition) - depositing mel-
ted material layer by layer onto the build plat-
form
Layer Resolution 90-390 microns 90-290 microns
Minimal Wall Thickness 400 microns
Dimensional Accuracy +/- 0.2%*
Angle Accuracy +/- 0.2%**
Platform levelling Automatic measurement of platform points’ height
3D Printer
Build volume 200 x 200 x 180 mm
[7.9 x 7.9 x 7.1 in]
300 x 300 x 300 mm
[11.81 x 11.81 x 11.81 in]
Material Container Spool
Material Diameter 1.75 mm [0.069 in]
Nozzle Diameter 0.4 mm [0.015 in]
Support Mechanically removed - printed with the same
material as the model
Extruder Single
Connectivity SD card [included]
Available Materials Full oer is available at:
https://zortrax.com/materials/zortrax-m-series/
External Materials Applicable

zortrax M Series Specifications

General

Brand	zortrax
Model	M Series
Category	3D Printers
Language	English