©2018, Zortrax S.A. All rights reserved. All trade names, logos and trademarks mentioned in the following document are registered
trademarks of Zortrax and are subject to legal protection.
39
Available Materials
The complete oer of materials is available at: https://zortrax.com/materials/zortrax-m-series/. Mate-
rial Technical Data Sheets and Safety Data Sheets can be found at the same website.
When 3D printing with Zortrax devices, we recommend using Zortrax certied materials so as to
acquire the best possible quality of the prints.
Basic Maintenance and Service Work
Maintenance work should be regular in order to keep the printer in good condition and achieve high
quality prints every time. Some parts require maintenance before each print and some every few hun-
dred working hours. All maintenance activities do not take much time and they are not complicated.
Before commencing any repair it is extremely important to turn o the printer and let it cool down.
Remember to always wear safety gloves and glasses.
The printer is delivered with a full set of tools needed to carry out maintenance and service work.
The following tables present maintenance and repair guidelines connected with each section of Zor-
trax 3D printer, together with specic check points, necessary activities and their frequency.
To Next Page
Loading...
Need help?
General
