48
Connecting to Networks
Connecting to Mobile Networks
Manage the nano-SIM Cards
When two nano-SIM cards are installed, you can turn off one of
them, or choose the default card for calling and data.
To turn on or off a card:
1. Open Settings and touch Mobile network > SIM cards.
2. Touch the on/off switch next to a card at the top.
NOTE:
You can touch to edit the card name.
To set the default card for calling and data connection:
1. Open Settings and touch Mobile network > SIM cards.
2. Below Default SIM for calling and Default SIM for cellular
data, select a card as the default.
NOTES:
When two nano-SIM cards are installed, switch on Dual sim
smart switch if you want to use the other card for mobile
data when the network status of the card you select for
mobile data is poor.
When two nano-SIM cards are installed, you can allow the
non-data SIM card to temporarily use mobile data as it is
connected to a VoLTE call. Switch on Connect to network
To Next Page
Loading...
Need help?
General
