Zte H1600 User Manual

28
SJ-20210621164956-008 | 2022-09-01(R1.3)
ZTE H1600 Maintenance Management Guide
Parameter
Description
They are provided by the ISP.
IP Version
The IP version includes: IPv4, IPv6 and IPv4/v6
In this case, IPv4 is selected.
*Authentication Type
There are three authentication types:
⚫
Auto
⚫
PAP
⚫
CHAP
*Connection Mode
There are two connection modes:
⚫
Always On
⚫
On Demand
*PPPoE Pass-through Enable or disable the PPPoE Pass-through function.The default configu-
ration is on.
NAT
Enable or disable the NAT function.
IPv4
IP Type
By default, it is set to DHCP. Options:
⚫
DHCP: The DHCP server automatically allocates a dynamic IP ad-
dress to the device.
⚫
Static: You need to specify a static IP address for the device.
IP Address
WAN IP Address of ZTE H1600.
Subnet Mask
WAN subnet mask of ZTE H1600.
Gateway
The IP address of the upstream gateway device connected to the ZTE
H1600.
DNS1-DNS3
IP address of the DNS server for static connections. You can set up to
three IP addresses for the server. These IP addresses are provided by
the ISP.
IPv6
IPv6 Info Acquire
Mode
Specifies how to acquire IPv6 information for the WAN connection. It is
valid only if the WAN connection supports IPv6.
The options are:
⚫
Manual :You need to set the global address, gateway, and DNS ac-
quisition modes.
⚫
Auto :The global address, gateway, and DNS acquisition modes are
automatically configured.
Request PD
By default, the On button is selected.
Unnumbered Mode
By default, the On button is not selected. If it is selected,
Specifies how to acquire the global IPv6 address.

Zte H1600 Specifications

General

Brand	Zte
Model	H1600
Category	Gateway
Language	English