7 Configure the Management and Diagnosis
SJ-20200714160642-002 | 2020-07-27(R1.0)
Note
The configuration takes effective after the device is restarted.
7.12
Configure the Ethernet WAN
This page will help you convert LAN to WAN interface.
1.
On the main page of the ZXHN H2640, select Management&Diagnosis > Ethernet
WAN to the Ethernet WAN page, see Figure 7-20.
Figure 7-20 Ethernet WAN Page
2.
Set radiobox On, the device will reboot and LAN will work as WAN interface.
3.
Click Apply button to apply the changes.
To Next Page
Loading...
Need help?
General
